WB-6-PVH
Picture shown with optional handle
WB-6-PVH Wire Bonder Operating Specifications
Appropriate Substrates:
Two things are necessary for achieving good results.
1. Planar bottom surface
2. Substrate must be at least as thermally conductive as G10 epoxy glass laminate.
Substrate Limit:
5.5"
Temperature Range:
Ambient to 200șC
Temperature Monitoring:
Digital PID controller
Heating Zones:
6" Diameter
Dimensions:
Diameter: 7"
Height: 2.5" to 4"
Shipping Weight:
12 lbs
Power Requirements:
5A @ 115 Vac
Facilities Requirements:
Table mounted, no facilities requirements when operated in open area.
House vacuum
WB-6-PVH Wire Bonder Features
Reflow Soldering / Curing:
Our STI family of heat bonders are the SMT/Hybrid standard for reflow soldering, curing, and repair. Bottom side heat technology allows for safe preheating and curing of substrates and SMT boards.
Thermal Shock:
The WB-6-PVH is an excellent preheat tools for repair work on substrates and components. Our heat bonders are ideal for curing epoxy and silicon encapsulations.
wire bonder Conductive Surface:
The thermal conductive surface has a non-stick finish. The bottom surface transfers the heat from the bottom up, heating the substrate and solder joints, rather than temperature sensitive components.
Simple Operation:
The WB-6-PVH is a self-contained bonder. They have a safety fuse, illuminated On/Off switch, a digital PID controller for temperature adjustment, and a heat "ON" lamp indicator. These allow for safe operation in a lab or a production environment.
Easy to Profile:
The operation has a complete control and view of the wire bonder profile. A single front panel control is used to adjust the temperature setting.
Repeatable Operation:
Profiling of the WB-6-PVH can be easily adjusted for different applications by adjusting the front panel control at the proper set point for the selected profile.
Knurled knob allows you to rotate the bonder with out turning it off.
Height Adjustment
Can be adjusted from 3 inches to 4 inches and locks with locking ring.
Vacuum
Secures the part to the top plate. Can be turned on and off to allow switching of part.