High Temperature HP-1010-P-400
High Quality HP-1010-P-400 Image
HP-1010-P-400 Hot Plate Operating Specifications
Appropriate Substrates:
Two things are necessary for achieving good results.
1. Planar bottom surface
2. Substrate must be at least as thermally conductive as G10 epoxy glass laminate.
Substrate Limit:
9.5" x 9.5"
Temperature Range:
Ambient to 400ºC
Temperature Monitoring:
Digital PID controller
Heating Zones:
10" x 10.5" hot plate
Dimensions:
HP-1010-P: Length = 12", Width = 11", Height = 2"
HP-1010-P400: Length = 17", Width = 13", Height = 4.5"
Shipping Weight:
HP-1010-P: 6 lbs.
HP-1010-P400: 20 lbs
Power Requirements:
8A @ 115 Vac **************
220 Vac models also available
Facilities Requirements:
Table mounted, no facilities requirements when operated in open area.
HP-1010-P-400 Hot Plate Features
Reflow Soldering / Curing:
Our STI family of hot plates are the SMT/Hybrid standard for reflow soldering, curing, and repair. Bottom side heat technology allows for safe preheating and curing of substrates and SMT boards.
Thermal Shock:
The HP-1010-P-400 is an excellent preheat tools for repair work on substrates and components. Our hot plates are ideal for curing epoxy and silicon encapsulations.
Hot Plate Conductive Surface:
The thermal conductive surface has a non-stick finish. The bottom surface transfers the heat from the bottom up, heating the substrate and solder joints, rather than temperature sensitive components.
Simple Operation:
The HP-1010-P-400 is a self-contained plate. They have a safety fuse, illuminated On/Off switch, a thermal switch with a temperature adjustment, and a heat "ON" lamp indicator. These allow for safe operation in a lab or a production environment.
Easy to Profile:
The operation has a complete control and view of the hot plate profile. A single front panel control is used to adjust the temperature setting.
Repeatable Operation:
Profiling of the HP-1010-P-400 can be easily adjusted for different applications by adjusting the front panel control at the proper set point for the selected profile.
